Designed for the space
Dimensions and layout are checked against the room and your priorities.
Hinged-door wardrobes in Benicàssim. Each door swing is checked against the bed, bedside tables and room doors. Hinges must allow access to internal drawers.
A hinged door reveals the whole module, but its width and swing must work with the bed, bedside tables, sockets and circulation. The proposal continues to prioritise simple maintenance, closed storage and a specification suited to both seafront and town properties.
Dimensions and layout are checked against the room and your priorities.
We compare suitable materials and hardware before the specification is approved.
The quotation identifies the furniture, fitting and any optional or separate work.
Your contact coordinates questions about the proposal and the next steps.

I'm Mateo Carrasco. An everyday home and a weekend retreat can have different needs. Tell me how you use yours and what you would like to improve; we'll start with those priorities.
No obligation. Rough measurements are enough to get started.
More doors do not guarantee better access. We establish width, hinges, handles and modules so the elevation remains proportionate and practical. In Benicàssim, it is tested against seasonal occupation, coastal humidity, strong sun and access within residential developments.
We draw every door open against the bed, bedside table, wall and entrance door rather than transferring a standard composition. On that basis, the project has a specific outcome: the user can stand in front without becoming trapped.
A catalogue does not decide this point. We relate door count to modules, height and elevation rhythm. The important result is simple: the doors do not become heavy or fragment the elevation without reason.
Each door retains alignment and adjustment through use. That is why we select hinge quantity and type according to height, weight and opening.
We align the door, division and pull-out accessories once dimensions have been checked. The direct consequence: drawers, rails and baskets remain accessible without overlap.
A hinged door works well when the elevation, interior and space in front have been drawn together. The scenarios are adjusted for historic villas, apartments, terraced houses and homes used permanently or seasonally.

The drawing records how we divide the elevation around personal interiors and one shared zone. A later review leaves one clear criterion: each person opens their module without moving another door. The actual property conditions in Benicàssim take priority over a catalogue solution.

First, we allow separation, an opening restriction or a proportionate trim. After that, the handle and edge do not mark the perpendicular wall. The approach is adapted to historic villas, apartments, terraced houses and homes used permanently or seasonally, without turning location into a preset style.

A nominal dimension is not enough here. We calculate weight, stiffness, hinges and adjustment points. After the review, the vertical composition does not lose stability. The approach is adapted to historic villas, apartments, terraced houses and homes used permanently or seasonally, without turning location into a preset style.
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on InstagramWidth, height, handle and hinge produce different demands. The wardrobe interior sets the most useful rhythm. The actual property in Benicàssim completes the choice.
| Configuration | Usually solves | Critical check |
|---|---|---|
| Four or six doors | Usually considered for: Long wall with clear modules | Advance check: Rhythm, junctions and simultaneous opening |
| Full-height door | Frequent application: Continuous vertical elevation | Advance check: Stiffness, hinges and floor clearance |
| Separate top cupboard | Planning scenario: Daily storage below, seasonal above | Critical point: Horizontal line and access |
| Applied handle | Typical context: Direct opening and visible detail | The site survey tests: Projection, impact and ergonomics |
| Finger pull or push | Most frequent use: Quieter elevation | The proposal must resolve: Grip, fingerprints and adjustment |
| Two wide doors | Most frequent use: Short wardrobe with broad access | Do not close the design without reviewing: Weight and swing space |
The project approach shows the elevation closed and open, allowing swing, access and layout to be approved before manufacture.
Before this part is approved, we survey the wardrobe, bed, bedside tables, doors, windows, sockets and route. The objective is clear: each door swing starts from the complete room.
This is not about adding more modules. We resolve quantity, width, height, joints, handles and horizontal lines. Usefulness is tested in one way: the elevation responds to the internal storage and wall proportion. The proposal must continue to prioritise simple maintenance, closed storage and a specification suited to both seafront and town properties.
We do not close this decision on an assumption. We align modules, rails, drawers and accessories with each opening. The final check is straightforward: all contents are reached through the corresponding door.
From the first proposal, we specify load, hinge quantity, closing, restriction and adjustment. The expected outcome: the intended movement is documented.
From the first proposal, we close substrate, thickness, lacquer, veneer, board, mirror and edges. The expected outcome: the door retains flatness and durability.
Instead of assuming a standard answer, we hang, adjust gaps, check closing and review rubbing points. The intended result can be stated plainly: the elevation is handed over level and functional.
Moving switches, correcting walls, decoration or removing the old wardrobe are separate items when applicable. Any additional work identified in Benicàssim is added only after it has been explained and priced.
Door count, height, finish, hinges, interior and fitting space change cost and programme. In Benicàssim, we also confirm seasonal occupation, coastal humidity, strong sun and access within residential developments.
We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.
The bedroom, opening, access and door movement are checked before the storage plan and elevation are approved.
Drawings, finishes, hardware, project content and detailed quotation are accepted before the workshop slot is booked.
Delivery, protection, installation, adjustment and final review are coordinated in Benicàssim. The proposal must continue to prioritise simple maintenance, closed storage and a specification suited to both seafront and town properties.
The proposal becomes more coherent when we assess wide doors, higher door counts, top cupboards and continuous panels. The requirement remains unchanged: the selected composition reflects its actual work.
We size hinges, soft closing, push catches, restrictors and accessories. Each mechanism relates to weight and frequency.
First, we evaluate together board, lacquer, veneer, mirror, finger pulls and applied handles. After that, preparation, edging and machining appear in the agreed scope.
With the recess verified, we include carcasses, equipment, access, hanging, adjustment and review. Approval depends on one clear result: the elevation is assessed as part of the complete wardrobe. The actual property conditions in Benicàssim take priority over a catalogue solution.
Projects may involve historic villas, apartments, terraced houses and homes used permanently or seasonally. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.
For custom hinged-door wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.
Seasonal occupation, coastal humidity, strong sun and access within residential developments can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.
The recommendation continues to prioritise simple maintenance, closed storage and a specification suited to both seafront and town properties. Materials and accessories are compared by care and usefulness, not by a presumed local style.
We publish how to contact us and when the team is available. Project-project-specific facts in Benicàssim are recorded prior to production.
We work in Spanish, English, German and Russian, by WhatsApp, e-mail or at the Benicàssim office by appointment.
MMV Studio routes the request through a project manager who keeps the site survey, design, workshop and installation connected.
The enquiry is associated with mueblesamedidabenicassim.es and proyectos@mueblesmedidavalencia.es. Controller details and terms of use appear in the legal notice.
Enquiry hours: Monday–Friday 09:00–13:00 / 14:00–20:00. Saturday 10:00–13:30 / 16:00–19:30.
Coverage, duration, supplied elements, fitting conditions, maintenance and exclusions are set out in writing before workshop production.

Tell me when the home is used and what always needs to be within reach. That information will help us consider storage and finishes around a specific pattern of use.
Scope and terms are confirmed before you place an order.
Narrower leaves can be compared where they improve opening, weight or proportion. The interior must remain accessible.
Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.
The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.